Pico Controller | |
|
|
Cursor Display
There are two different cursor types:
Full block navigation is shown as a flashing block:
•Move cursor with the left/right arrows
•When in circuit diagram, also use up/down arrows
Parameter change cursor flashes the selected parameter:
•Change position with left/right arrows
•Change values with up/down arrows
Flashing values/menus are highlighted in grey in this manual.
WINTER | TIME | ||
DAY : | MO |
|
|
TIME : | 01 |
| 25 |
| |||
|
WINTER | TIME | |
DAY | : | MO |
TIME : | 01:25 |
Circuit Diagram Menu
Input | Output | |||
Contacts | Coil Field | |||
|
|
|
|
|
|
|
|
|
|
Circuit Connections/Rungs
I1
I2
Branch Connections
Each rung can hold four instructions, three input instructions (contacts) and one output instruction (coil or relay). Rungs are connected together through branches at the three positions between instructions. All programming of Pico can be done using the display and keypad.
Publication