Abit G740A, G740B Step 5 - Reconnect all cables & replace the cover., Step 6 - Start the computer and install the drivers.

1 22

2-4Chapter 2

Step 5 - Reconnect all cables & replace the cover.

Plug the cable from your computer monitor into the back of the

G740A/G740A Graphics Accelerator card. Make sure it is securely

fastened.

If you have cables for television input and output, S-video (video camera)

input and output, or a DVD add-on card, reconnect them to the card or via

the provided multi-function cable.

Carefully replace the computer cover and plug the power cord back in.

Step 6 - Start the computer and install the drivers.

Turn the computer on and allow the operating system to start. Microsoft

Windows should auto-detect the presence of the new graphics card and

prompt you to install the display drivers for it.

For Windows 95 & 98:

Insert the driver disc into your CD-ROM drive, and you will see the main

screen as below:

Contents

Main Page Table of Contents Page Chapter 1 Introduction Full Hardware Acceleration of Key 3D Features: Excellent 2D and Video Performance: Page Page Chapter 2 Installation System Recommendations Installation Guide Step 1 - Ground yourself. Step 2 - Unplug the computer and remove the cover. Step 3 - Remove the current graphics card. Step 4 - Insert the G740A/G740B Graphics Accelerator card. Step 5 - Reconnect all cables & replace the cover. Step 6 - Start the computer and install the drivers. Page Page Page Page Chapter 3 Troubleshooting and Support Troubleshooting Guidelines Gathering Information The Symptom Table The Solution Table Troubleshooting and Support 3-3 Technical Support For the latest information or any questions, call your local Field Sales Representative. Page Technical Information 4-1 Technical Information Display Information DDC Monitor Support Mechanical / Thermal Specifications Connector Descriptions CON4 - 15Pin VGA Connector VMI Feature Connectors