Installation

2-1

Chapter 2

Installation

 

 

System Recommendations

Before attempting to install the G740A/G740B Graphics Accelerator card into a computer, make sure that there is an available AGP expansion slot on the (PCI 2.1 compliant) motherboard. Additionally, it is recommended that your computer meet the following:

Pentium® II processor-based system

At least 32 MB of SDRAM main/system memory

DVD license compliant hardware (drive, authentication and descrambler modules, etc.)

Microsoft Windows® 95, Windows® 98, or Windows® NT 4.0 (or higher) operating system

Microsoft® DirectX* version 5.0 or later

Note: For full and correct operation of the card under Windows®

95, you must be using OEM Service Release (OSR) 2.1 or later. For Windows® NT 4.0, you need to have installed Service Pack (SP) 3.

Installation Guide

This guide will take you through the steps to take in order to properly install the G740A/G740B Graphics Accelerator card into your computer. Please note that your computer may differ slightly from the illustrations and screen shots displayed in this manual.

Page 9
Image 9
Abit G740A, G740B user manual System Recommendations, Installation Guide