Abocom AR1000 manual Setting Up the Hardware Environment, Connecting All Cables to the Network

Setting Up the Hardware Environment

Connecting All Cables to the Network

Perform the following procedures to set up the ADSL ROUTER.

Step 1 Connect the power adapter to the port labeled 5VDC on the rear panel of this device.

Step 2 Connect the Ethernet cable.

One PC – ADSL Router (direct connection)

If your only have one PC, you can connect your ADSL ROUTER to the PC directly without a hub. For a single Ethernet-equipped PC, use the "non-hub" twisted-pair crossover cable to connect the ADSL ROUTER Ethernet port to the Ethernet port on your computer.

Home Network – ADSL Router (connection through Ethernet Switch/Hub)

If your ADSL ROUTER is connected to a home network, you may use a standard Ethernet cable (not provided) to connect your ADSL ROUTER Ethernet port to an available port on your home network Ethernet hub.

Step 3 Connect the ADSL cable to the ADSL ROUTER. Connect the ADSL ROUTER to the ADSL line with the provided telephone cable.

- 3 -