Page 9
Wireless Access Point Setup In order to use the Access Point, other Wireless devices must use the same
SSID and WEP settings as the Wireless Router.
The Wireless Router's default settings are as follows.
Setting Wireless Router
SSID Default value: Untitled
This may be changed on the Wireless
screen, on the Wireless Router's main
menu.
WEP Default value: Disabled
Use the Wireless screen, on the Wireless
Router's main menu, to enable and config-
ure WEP.
Ensure the Wireless Router and the other Wireless Stations are using
the same settings.
• Use the Wireless screen to configure the Wireless Access Point in the
Wireless Router.
• Use the software supplied with the Wireless card to configure the PC
Wireless stations.