• DSL or Cable modem for broadband Internet access.
• Standard Network cables.
• TCP/IP network protocol installed on each PC.
• Wireless Access Point requires Wireless devices compliant with the IEEE
802.11g specifications.
Setup n Physical Installation
1. Ensure the Wireless Router and the DSL/Cable modem are powered OFF
before commencing. Leave your DSL/Cable modem connected to its wall
socket (phone line or cable input).
2. Use standard LAN cables to connect PCs to the Switching Hub ports on
the Wireless Router. Both 10BaseT and 100BaseT connections can be
used simultaneously.
3. Connect your DSL/Cable Modem to the WAN port on the Wireless
Router. Use the cable supplied with your DSL/Cable modem, or a stan-
dard network cable.
Page 1