Abocom ARM904 Linux Setup using X Windows n

Page 8
Linux Setup using X Windows
n Internet Access
Follow this procedure to set your system to act as a DHCP client, obtaining
an IP Address and related data from the Wireless Router's DHCP Server.
1. Start your X Windows client.
2. Select Control Panel - Network
3. Select the "Interface" entry for your Network card. Normally, this will be
called "eth0".
4. Click the Edit button, set the "protocol" to "DHCP", and save this data.
5. To apply your changes
• Use the "Deactivate" and "Activate" buttons
• OR, restart your system.