Abocom ARM904 user manual Configuration, Testing Plug and Play

4.Connect the supplied Power Adapter and power on.

5.Check the LEDs

•The Power, Internet, and WLAN LEDs should be ON.

•For each active LAN (PC) connection, the LAN LED should be ON.

oConfiguration

The Wireless Router can "Plug and Play" if your DSL/Cable modem connec- tion uses only a dynamic IP address.

Testing Plug and Play

1.Power up the DSL/Cable modem.

2.Power up the Wireless Router.

3.Power up the PCs.

4.On the PC, start your Web Browser, and try to connect to a well-known site, such as www.microsoft.com

•If this doesn't work, follow the procedure in the next section Manual Configuration.

•If this works on some PCs, but not all, see PC Setup for details on con- figuring the PCs which do not work.

Page 2