3.In Networks dialog box, check the radio button before "Install Microsoft Windows Network" and "No Additional Network". Press OK to go back the Network Settings screen.
4.Click on "Drivers..." button to select network driver.
5.In "Network Drivers" dialog box, press "Add Adapter..." button to enter "Add Network Adapter" dialog box. Select "Unlisted or Updated Network Adapter" and press OK.
6.Windows will prompt an "Install Driver" dialog box. In this time, put the software diskette into floppy drive and press OK.
7.Select the "Real mode NDIS2 for...." string and press OK.
8.Follow Windows instructions to complete the installation and exit Windows.
9.Run INSTALL.EXE from driver diskette's root directory.
10.Select "Windows for Workgroup" in
"Network Operating System" screen and enter "Driver Install" screen.
11.If current settings are acceptable, select "Start Installation" and go to step 13. Otherwise, select "Modify Parameters" to make settings changed.
12.Move cursor to focus on the setting you want to make change and press Enter to select a fit value. When the configuration is accepted, press Enter on the OK field to exit the screen.
-11 -
