Specifications

 

GBC ThermaBind T200

 

 

 

 

 

 

Format

DIN A4

 

Binding channel size

310 x 21mm

 

 

 

 

Maximum binding thickness

20mm

 

 

 

 

Warm up

5 minutes

 

Binding cycle

Fixed – 40 seconds

 

Safety shut off

Yes

 

 

 

 

Energy consumption – standby

100W

 

 

 

 

Energy consumption – binding

300W

 

Power supply

230V 50 Hz

 

 

 

 

Net weight

1kg

 

 

 

 

Dimensions

365 x 135 x 85mm

 

 

 

 

Approvals

CE

 

Special notice

Thank you for choosing a GBC Binding Machine. We aim to produce quality binding machines at an affordable price, with many advanced features to enable you to create excellent results every time. Before using your machine for the first time, please take a few minutes to read through this guide.

Safety instructions

m

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE MESSAGES CAREFULLY.

General safeguards

Please read the instructions and keep them safe for future reference.

When using the machine, always ensure the machine is on a flat and stable surface.

Do not touch the heating plate of this machine, as it may be hot.

Keep out of reach the reach of children at all times.

Do not tamper in any way with the internal mechanisms of this machine.

Do not close the lid when the machine is in use.

Do not immerse in liquid.

Service

Within a warranty period of 2 years from the date of purchase, ACCO Brands Europe will at its own discretion, repair or replace defective original parts. The warranty specifically excludes faults or breakdown occurring as

a result of accidental or intentional misuse or failure to operate or maintain the machine if accordance with the manufacturer’s instructions.

Model

Warranty Period

GBC ThermaBind T200

2 years (parts & labour)

 

 

Maintenance options

If you would like to extend your warranty coverage beyond the stated manufacturers period, please consult your local ACCO Brands Europe reseller for options.

Setting up

1Remove your Thermabind T200 from the packaging. Check that the Rating Plate on the machine corresponds with your electricity supply.

2Place the Thermal Binder on a flat stable surface. The plug should be inserted into a near and easily accessible outlet.

3Lift the lid of the machine into the upright position, before switching the machine on. (diag.1)

4Press the ‘On/Off’ Switch (A) on the right side of the machine. A red LED light indicates that the machine is on and the heating plate is warming up.



Page 4
Image 4
ACCO Brands T200 instruction manual Safety instructions