Ethernet+Modem/Fax PC Card User’s Guide
3-2 Using 1Step
Overview of 1Step
1. Type the following command at the DOS prompt, then press <Enter> to
display the main screen for 1Step:
1STEP <Enter>
2. Select the appropriate hardware settings for Card diagnostics.
Select values for the I/O base address and interrupt.
3. Run diagnostics.
Select Test Adapter from the Action Menu to run the diagnostics
program.
4. Select the appropriate software configuration for the Card.
Identify the Network OS, Driver, Frame Type, and memory management
option in use; and then indicate the directory location of the drivers.
5. Install software.
Run the Install Software command from the Action Menu.
Executing this command automatically creates a software configuration file
and a batch file. You may run this batch file under DOS to install the driver
you’ve selected.
6. Return to DOS.
Select Exit from the File Menu to leave 1Step and go back to DOS.