1 Introduction
Power Supply Socket
The power socket is located on the rear panel of the switch. The standard power socket is for the AC power cord.
100-240V ~50-60Hz 0.8A
Figure 1-4 Power Supply Socket
Features and Benefits
Connectivity
•24 10/100/1000 Mbps ports for easy Gigabit Ethernet integration and for protection of your investment in legacy LAN equipment.
•Auto-negotiation enables each RJ-45 port to automatically select the optimum communication mode (half or full duplex) if this feature is supported by the attached device; otherwise the port can be configured manually.
•RJ-45 10/100/1000BASE-T ports support auto MDI/MDI-X pinout selection.
•Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for 10 Mbps connections, Category 5 or better for 100 Mbps connections, and Category 5, 5e, 6 or better for 1000 Mbps connections.
•IEEE 802.3-2005 Ethernet, Fast Ethernet, and Gigabit Ethernet.
Expandability
•Four Small Form Factor Pluggable (SFP) transceiver slots (shared with 1000BASE-T ports)
•Supports 1000BASE-SX, 1000BASE-LX and 1000BASE-LH SFP transceivers.
Performance
•Transparent bridging.
•Provides store-and-forward switching.
•Jumbo-Frame up to 9,6 Kbytes
•Supports flow control
•Broadcast storm control
