Accton Technology ES4324 Safety Compliance, Power Cord Safety, Warning Fiber Optic Port Safety

Models: ES4324

1 60
Download 60 pages 59.54 Kb
Page 7
Image 7
Safety Compliance

Safety Compliance

Warning: Fiber Optic Port Safety

 

When using a fiber optic port, never look at the transmit laser while it is

CLASS I

powered on. Also, never look directly at the fiber TX port and fiber cable

LASER DEVICE

ends when they are powered on.

 

Avertissment: Ports pour fibres optiques - sécurité sur le plan optique

DISPOSITIF LASER

Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez

jamais directement le port TX (Transmission) à fibres optiques et les

DE CLASSE I

embouts de câbles à fibres optiques tant qu'ils sont sous tension.

 

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit

Niemals ein Übertragungslaser betrachten, während dieses

LASERGERÄT

eingeschaltet ist. Niemals direkt auf den Faser-TX-Anschluß und auf die

DER KLASSE I

Faserkabelenden schauen, während diese eingeschaltet sind.

 

Power Cord Safety

Please read the following safety information carefully before installing this switch:

Warning: Installation and removal of the unit must be carried out by qualified personnel only.

The unit must be connected to an earthed (grounded) outlet to comply with international safety standards.

Do not connect the unit to an A.C. outlet (power supply) without an earth (ground) connection.

The appliance coupler (the connector to the unit and not the wall plug) must have a configuration for mating with an EN 60320/IEC 320 appliance inlet.

The socket outlet must be near to the unit and easily accessible. You can only remove power from the unit by disconnecting the power cord from the outlet.

This unit operates under SELV (Safety Extra Low Voltage) conditions according to IEC 60950. The conditions are only maintained if the equipment to which it is connected also operates under SELV conditions.

France and Peru only

This unit cannot be powered from ITsupplies. If your supplies are of IT type, this unit must be powered by 230 V (2P+T) via an isolation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to earth (ground).

Impédance à la terre

iii

Page 7
Image 7
Accton Technology ES4324 manual Safety Compliance, Power Cord Safety, Warning Fiber Optic Port Safety, France and Peru only