Acer 1800 manual Ovp, Esd, Power Management, Environmental Requirements

AC Adapter

Item		Specification
DC output voltage	18.0 ~ 20.0
Constant output	7.9A
Dynamic Output Characteristics
Start-up time	3 sec. (@115 Vac and 230Vac full load)
Hold up time	5ms min. (@115 Vac input, full load)
Over Voltage Protection	25V
(OVP)
Short circuit protection	Output can be shorted without damage, and auto recovery
Electrostatic discharge	15kV (at air discharge)
(ESD)	8kV (at contact discharge)
Dielectric Withstand Voltage
Primary to secondary	4242 Vdc for 1 second-
Leakage current	60uA at 240Vac/60Hz
Regulatory Requirements	1. FCC class B requirements (USA)
	2. VDE class B requirements (German)
	3. VCCI classII requirements (Japan)
Power Management
ACPI Mode		Power Management
Mech. Off (G3)		All devices in the system are turned off completely.
Soft Off (G2/S5)		OS initiated shutdown. All devices in the system are turned
		off completely.
Working (G0/S0)		Individual devices such as the CPU and hard disk may be
		power managed in this state.
Sleeping State (S3)		CPU Power Down
		VGA Power Down
		PCMCIA Suspend
		Audio Power Down
		Hard Disk Power Down
		Super I/O Power Down
Sleeping State (S4)		Also called Hibernate state. System saves all system
		states and data onto the disk prior to power off the whole
		system.
Environmental Requirements
Item		Specification
Temperature
Operating	+5 ~ +35°C
Non-operating	-20 ~ +65°C (storage package)
Humidity

Operating

Altitude

10% ~ 90% without condensation

Operating sea level 0 to 10,000ft

Storage sea level 0 to 40,000ft

Chapter 1 31