Acer 270 manual Screen Expansion, Option Enabled or Disabled

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings..

Parameter	Description	Format/Option
System Time	Sets the system time.	Format: HH:MM:SS
		(hour:minute:second)System Time
System Date	Sets the system date.	Format MM/DD/YYYY (month/day/
		year)
		System Date
Floppy Disk Drive	Shows floppy drive type information.
Internal Hard Disk	Shows the hard disk types and capacity. If there
	is no hard disk present or unknown type, “None”
	should be shown on this field, otherwise the
	capacity must be shown.
ATAPI Device	Auto detects and shows the CD-ROM, DVD-
	ROM or CD-RW types. If there is no ATAPI
	Device present or unknown type, “None” should
	be shown on this field, otherwise the model
	name must be shown.
Boot Display Device	Both: Simultaneously enable both the integrated	Option: Both or Auto-Selected
	LCD screen and the system’s external video port
	(for an external CRT or projector).
	Auto-Selected: During power on process, the
	system will detect if any display device is
	connected on external video port. If any external
	display device is connected, the power on
	display will be in CRT (or projector) only mode.
	Otherwise it will be in LCD only mode.
Screen Expansion		Option: Enabled or Disabled
Television Type	Selects NTSC or PAL standard.	Option: NTSC or PAL
VGA Memory	Specifies the amount of main memory to allocate	Option: 32MB/16MB/64MB
	for VGA.

NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases.

40 Chapter 2