Disassembling the LCD Module
1.Remove the two screwpad then unscrew the two screws on the LCD bezel. One on each side.
2.Disattach the LCD bezel from the upper side of the LCD module carefully..
3.Unscrew the screw that holds the LCD inverter.
4.Disconnect the LCD wire set and LCD power cable from the LCD inverter.
5.Remove the eight screws that secure the LCD to LCD panel; four on each side.
6.Remove the LCD from the LCD panel.
7.Remove the six screws holding the right and the left LCD brackets. Four on each side.
8.Tear off the mylar that fastens the LCD wire set..
9.Disconnect the LCD wire set.
10.Unscrew the two screws that secure the right and left hinges. Then remove the two hinges.
11.Unscrew the three screws then remove the LCD latch.
68 | Chapter 3 |
