2. | Type the current password in the Enter Current Password field and press | . | |
3. | Press | twice without typing anything in the Enter New Password and Confirm New Password fields. | |
| The computer then sets the Administrator Password parameter to “Clear”. |
| |
4. | When you have changed the settings, press to save the changes and | the BIOS Setup Utility. | |
Changing a Password
1. | Use |
| and | keys to highlight the Set User Password parameter and press the | key. The Set | ||||
| Password box appears: |
|
|
|
| ||||
2. | Type | current password in the Enter Current Password field and press | . |
| |||||
3. | Type a password in the Enter New Password field. Retype the password inexit | Confirm New Password | |||||||
| field.the |
|
|
|
|
|
|
| |
4. | Press |
| . After setting the password, the computer sets the User Password parameter to “Set”. | ||||||
5. | If desired, you can enable the Password on bootu | parameter. |
| e | |||||
6. | When youware done,y | press | to save the changes and exit the BIOS Setup Utility. | ||||||
If the verification is OK, the screen will display as following. |
| ||
The password setting is complete after the user presses . |
| ||
If the current password entered does not match the actual current password, | screen will show you the | ||
Setup Warning.e | u | u | the |
44 |
| Chapter 2 | |
