Acer 3040, 3030 manual Input Requirements, Output Ratings CV mode, Dynamic Output Characteristics

12.1” LCD Panel

Item		Specification
Surface Treatment	Hard coating(3H) glare	Hard coating(3H) glare	Hard coating(3H)
	type/anti-glare type	type/anti-glare type	glare type/anti-glare
			type
Typical White Luminance (cd/m2)	180(Typical)	200(Center Typical)	200(Typical)
also called Brightness
Contrast Ratio	400 :1(Min)	300:1(Min)	500(Typical)
Response Time (Optical Rise	25(Typical)	50(Max)	25(Typical)
Time+Fall Time)msec	35(Max)		35(Max)
Normal Input Voltage of Power	+3.3V(Typical)	+3.3V(Typical)	+3.3V(Typical)
Supply
Power Consumption (watt)	4.5(Typical)	4.8(Typical)	3.66(typ) IL=6.0
Weight	280g (0.5mm glass)	250g	260(Typical)
Physical Size(mm)	275.82(H)x178(V)x5.2(	275..82(H)x178(V)x5.2(	275.8(H)x178(V)x4.9(
	D) (Max)	D)(Max)	D)(Typical)
Electrical Interface	1 channel LVDS	LVDS interface	3.3V LVDS with 1
		system(H-Sync, V-	pixel/clock
		Sync)
Support Color	Native 262K colours	256K colors	Native 262K colours
Viewing Angle (degree)
Horizontal: Right/Left	40/40	45/45	45/45
Vertial: Upper/Lower	10/30	15/35	20/45
Temperature Range( ° C)	0 to +50	0 to +50	0 to +50
Operating
	-40 to +60	-25 to +60	-25 to +60
Storage (shipping)

Item	Specification
Vendor & model name	LITEON-65W, PA-1650-02 QY YELLOW 1.7X5.5X11 LF
Input Requirements
Maximum input current (A,	1.6A @100Vac input and maximum load
@100Vac, full load)
Nominal(Rated) frequency	50 or 60 and single phase
(Hz)
Frequency variation range	47 - 63
(Hz)
Nominal voltages (Vrms)	100-127(low range)
	200-240(high range)
Efficiency	High efficiency 83% minimum, full load, warm-up condition.
Output Ratings (CV mode)
Rated output voltage	Offers rated output voltage 19.0V
Voltage Range	18.05V to 19.95V
Noise + Ripple	380mV
Rated Power	65Watts continuously at all specified conditions
Output current	0 A (min.) to 4.74A (max.)
Dynamic Output Characteristics
Start-up time	Shall less than 5 sec

36 Chapter 1