4.Follow the instructions in the message window.

NOTE: Make sure that the DIMM is fully installed into the connector. A loose connection can cause an error.

Power System Check

To verify the symptom of the problem, power on the computer using each of the following power sources:

1.Remove the battery pack.

2.Connect the power adapter and check that power is supplied.

3.Disconnect the power adapter and install the charged battery pack; then check that power is supplied by the battery pack.

If you suspect a power problem, see the appropriate power supply check in the following list: “Check the Battery Pack” on page 78

Chapter 4

77

Page 85
Image 85
Acer 3030, 3040 manual Power System Check