The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Parameter | Description | Option |
|
|
|
Supervisor Password is | Shows the setting of the Supervisor password | Clear or Set |
User Password is | Shows the setting of the uer password. | Clear or Set |
|
|
|
HDD Password is | This feature is available to user when | Disabled or Enabled |
| Supervisor password is set. Password can be |
|
| written on HDD only when Supervisor |
|
| password or user password is set and |
|
| password on HDD is set to enabled. |
|
| Supervisor Password is written to HDD only |
|
| when Supervisor password is being set. User |
|
| password is written to HDD when both |
|
| passwords are set. When both Supervisor and |
|
| user password are present, both passwords |
|
| can unlock the HDD. |
|
|
|
|
HDD Master ID | You can use HDD Master ID and MasterID |
|
| program together to remove HDD password. |
|
| Note: Remove HDD password SOP wll not be |
|
| released in service guide because of security |
|
| concern. Please request Remove HDD SOP |
|
| via tracking |
|
|
|
|
Set Supervisor Password | Press Enter to set the supervisor password. |
|
| When set, this password protects the BIOS |
|
| Setup Utility from unauthorized access. |
|
|
|
|
Set User Password | Press Enter to set the user password. When |
|
| set, this password protects the BIOS Setup |
|
| Utility from unauthorized access. |
|
| Note: The user password may not be set |
|
| unless the supervisor password is set. If the |
|
| user wishes to have only one password, |
|
| please set supervisor password. |
|
|
|
|
Set HDD Password | Press Enter to set the HDD password. When |
|
| set, this password protects the internal hard |
|
| disk from unauthorized access. |
|
|
|
|
Password on Boot | Defines whether a password is required or not | Disabled or Enabled |
| while the events defined in this group |
|
| happened. The following |
|
| requires the Supervisor password for changes |
|
| and should be grayed out if the user password |
|
| was used to enter setup. |
|
|
|
|
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don’t forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.
Setting a Password
Follow these steps as you set the user or the supervisor password:
1.Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The Set Supervisor Password box appears:
38 | Chapter 2 |