Removing the WLAN Module
1.See “Removing the Lower Cover” on page 52.
2.Disconnect the two (2) antenna cables from the WLAN Board
NOTE: Cable placement is Black to the TR1 terminal (next to DIMM module) and White to the TR2 terminal (closest to the edge of the chassis).
3.Remove the one (1) screw to release the WLAN Board.
Step |
| Size | Quantity | Screw Type |
|
|
|
|
|
WLAN Board | M2.0*3 |
| 1 |
|
|
|
|
|
|
56 | Chapter 3 |
