Power
50
soon as possible to prevent data loss.The following table gives you the recommendedcourses of action when you encounter a low-battery warning.
Situation Recommended Action
AC adapter and
power outlet are
available
1. Connect the AC adapter to the
computer to begin charging the
battery.
2. Resume work.
If you want the battery to recharge
faster, close the display or press
Fn+Esc ( ) to enter suspend
mode.
An extra fully-
charged battery
pack is available
1. Press Fn+F9.
2. Select Battery and press Enter
to enter suspend to disk mode.
3. After the computer has
powered off, open the battery
compartment cover.
4. Remove the used up battery
pack.
5. Install the new battery pack.
6. Press any key or open the
display to resume work.
Remember to recharge the old
battery pack.
AC adapter,
power outlet or
extra battery
pack is not
available
Close the display to enter suspend
mode.