5 Software
68
BIOS utility
The BIOS utility is a hardware configuration program built into your
computer's Basic Input/Output System (BIOS). Since most computers
are already properly configured and optimized, there is no need to run
this utility. However, if you encounter configuration problems and get
the "Run Setup" message, you will need to run this utility.
Note: Before you run BIOS, make sure that you have saved all
open files. The computer reboots immediately after you exit
Setup.
To run the BIOS utility, press the key combination Ctrl+Alt+Esc. For
information about BIOS and how to configure your computer, refer to
the Veriton 7200 online guide (see “Accessing the online guide”on
page 6).
VT7200-ug-e.book Page 68 Wednesday,July 18, 2001 1:28PM