Acer 800 manual 02F0 CPU ID

SG_TM800.book Page 71 Thursday, February 27, 2003 10:21 PM

Error Message List

Error Messages	FRU/Action in Sequence
02F0 CPU ID	CPU socket number for Multi-Processor error.
	Main board
02F4 EISA CMOS not writeable	System unable to write to EISA CMOS.
	Main board
02F5 DMA Test Failed	System unable to write to DMA (Direct Memory Access) registers.
	Main board
02F6 Software NMI Failed	System unable to generate software NMI (Non-Maskable Interrupt).
	Main board
02F7 Fail-Safe Timer NMI Failed	Fail-Safe Timer takes too long.
	Main board
Invalid System Configuration Data	Error with NVRAM (CMOS) data.
	Enter the BIOS Setup Utility and verify the parameters (try loading
	the default settings); then save and restart your computer.
	Main board
Operating system not found	Operating system cannot be found on the boot device.
	Enter the BIOS Setup Utility and verify the parameters (try loading
	the default settings); then save and restart the computer.
	Recover hard disk.
	Reinstall the operating system.
Parity Check 1 nnnn	Parity error found on system bus. BIOS attempts to locate the
	address and display it on the screen. If it cannot locate the address,
	it displays.
Parity Check 2 nnnn	Parity error found on I/O bus. BIOS attempts to locate the address
	and display it on the screen. If it cannot locate the address, it
	displays .

Chapter 4 71