Controller Start-up

Global Array Manager (GAM) Client

The controller can be configured using GAM. GAM can also be used from the server or a system client to monitor status and verify data integrity of disks connected to the controller while the system and disks are running.

For details on how to install and run GAM, refer to the Global Array Manager Client Software Installation Guide and User Manual.

In Case of Problems

If problems are encountered during start-up, check the following:

•Check SCSI cabling for loose connections, pin mismatches (make sure pin 1 on the cable matches pin 1 on the connector), bent pins, and damaged or crossed cables.

•Check cable length. This includes internal bus lengths in enclosures.

•Check termination.

•Check SCSI IDs on all drives.

Manual No. 775051

3-5