!Caution:
WEP Key needs to be the same for all IEEE802.11b stations.
Follow the steps below to set your WEP:
(1)Select the Encryption type: 64bit or 128bit.
(2)Type WEP Key: If you select 64bit, you must type 10 values in the following range (0~F) from Key1 to Key
4space. Besides, if you select 128bit, you must type
26values (0~F) in each WEP Key from Key 1 to Key
4.Please note that all the WEP Keys (key1~key4) have to be filled.
(3)Select WEP Key: Select one of WEP Key from Key1 to Key4 for using.
(4)Choose the WEP Mode: Mandatory for communicating with all stations having WEP enabled or Optional for WEP disabled.
(5)Select the Authentication Type: Open System or Shared Key.
(6)After all the settings are completed, click on Submit button to save the setting.
32
