English
14
Auto Keystone | Choose "On" to enable auto keystone. Choose "Off" to disable auto | ||
| keystone. |
| |
|
| ||
Manual Keystone | Adjusts image distortion caused by tilting projection. (±40 degrees) | ||
|
|
|
|
H. Position | • | Press | to move the image left. |
(Horizontal | |||
Position) | • | Press | to to move the image right. |
| |||
|
|
|
|
V. Position | • | Press | to move the image down. |
(Vertical Position) | |||
| • | Press | to move the image up. |
|
| ||
Frequency | "Frequency"changes the projector’s refresh rate to match the | ||
| frequency of your computer’s graphic card. If you can see a vertical | ||
| flickering bar in the projected image, use this function to make an | ||
| adjustment. |
| |
|
| ||
Tracking | Synchronizes the signal timing of the display with the graphic card. If | ||
| you experience an unstable or flickering image, use this function to | ||
| correct it. |
| |
|
| ||
Sharpness | Adjusts the sharpness of the image. | ||
| • | Press | to decrease the sharpness. |
| • | Press | to increase the sharpness. |
|
|
|
|
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under Video mode.
Note: "Sharpness" functions is not supported under Computer mode.
