English
24
Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.
Notice:
Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section.
•Change the "Startup Screen" from the default setting "Acer" to "User".
•Press "Screen Capture" to customize the startup screen.
•A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose "No" to cancel the screen capture and exist the onscreen display (OSD).
Screen Capture • A message appears stating that the screen capture is in progress.
•When the screen capture is finished, the message disappears and the original display is shown.
•The customized startup screen takes effect when there is a new input signal or when you restart the projector.
Note: This screen capture function is limited by 4:3 aspect ratio only.
Note: For XGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 1024 x 768 before using this function. Note: For SVGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 800 x 600 before using this function. Note: For WXGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 1280 x 800 before using this function.
Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-
Closed Caption Video input signal is selected and its system format is NTSC.
Set your screen aspect ratio to 4:3. The function is not available when the aspect ratio is "16:9" or 16:9 format detected under "Auto mode".
