9
Turning the Projector On/Off
Turning On the Projector
1Remove the lens cap.
2Ensure that the power cord and signal cable are securely connected. The Power LED will light red.
3Turn on the projector by pressing 
(POWER) on the control panel or remote control, and the Power indicator LED will turn blue.
4Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.
•If the screen displays "Lock" & "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected.
•If the screen displays "No Signal", please make sure the signal cables are securely connected.
•If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.
2&3 | 2&3 |
English
1 | 1 |
Lens cap | Lens cap |
|
