1 Getting started
Preparing to use your Acer n300
8
you can use your handheld for 8 straight hours of operation (backlight inactive)
before you need to recharge the battery.
To charge your Acer n300
Unlock the battery access latch to open the battery cover (a), insert the battery pack into the
battery bay (b), then close the battery cover to lock the battery pack..
NOTE: To take the battery pack out, first unlock the battery access latch to open the battery
cover, then pull the battery pack out of the bay.
Connecting the Sync cable
1 Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
2 Plug the AC adapter into any AC current outlet and charge the device for at least four
hours.