Acer n300 - page 22

1 Getting started
Preparing to use your Acer n300
12
To connect the computer
Via the USB Sync cable
1 Plug the sync cable into the 26-pin I/O connector on the bottom of your handheld.
2 Plug the AC adapter into any AC current outlet.
3 Plug the USB client connector into an available USB port on your computer.
Via the Cradle
1 Connect the AC adapter cord to the DC-in jack at the back of the cradle.
2 Put n300 on the cradle.
3 Plug the AC adapter into any AC current outlet.
4 Connect the mini USB client connector into the USB client port at the back of the
cradle.
5 Plug the USB client connector into an available USB port on your computer.