Installation

Powering On/Off the Projector

Powering On the Projector

1.Remove the lens cap.

2.Ensure that the power cord and signal cable are securely connected. The Power LED will flash red.

3.Turn on the lamp by pressing “Power/Standby” button on the control panel.And the Power LED will turn blue.

4.Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.

If the screen displays "Lock" & "Source" icons, it means the pro- jector locks on this source type and there is no such type of input signal found

If the screen displays “No Signal”, please make sure the signal cables are securely connected.

If you connect multiple sources at the same time, using the “Source” button on the remote control or control panel to

switch.

1 Power/Standby

Turn on the projector first and then the signal sources.

13... English

Page 15
Image 15
Acer PD523P, PD527 series, PD525P manual Powering On/Off the Projector, Powering On the Projector