Wireless projection

Setting up your WPG

Check the LED for the power status.

Red indicates that the WPG is receiving power, but is inactive.

Green indicates that the WPG is being used to project images.

You may also like to connect a LAN cable to the LAN (RJ-45) port on the side of the dongle. This will allow you to connect to the Internet to retrieve inter- active content or download firmware upgrades as they become available.

Connecting to the WPG for the first time

If this is the first time you’ve connected to the WPG, you will need to download and install the driver from the WPG. The software is stored on the WPG, so there is no need for an installation CD. Ensure that you have administrator-level permission on your computer so that you can install the software.

To download the software, you must ensure that your browser is set to open up a website. If your browser is set to open with a blank page, you will not be able to download the software. To check this, select Tools > Internet Options. Ensure that there is a website in the text box.

33... English

Page 35
Image 35
Acer PD525P, PD523P, PD527 series manual Setting up your WPG, Connecting to the WPG for the first time