Wireless projection
Introduction
This section will introduce wireless projection function for this projector. The wireless projection function is only available for the model which is equipped with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG enables multiple users to connect to an Acer projector wirelessly. This eliminates the need to plug and unplug cables, enabling more efficient use of meeting time, especially when there is more than one presenter in a meeting.
To perform wireless projection, you have to change the input source type to "Wireless" by pressing the "Wireless" button on the remote control or the "Source" button on the control panel or remote control.
System Requirements:
-Operating system: Windows® 2000 or Windows® XP
-CPU: Intel® Pentium® III at 750 MHz or equivalent with 128 MB of RAM
-Wireless LAN: IEEE 802.11b/g enabled
-Internet Browser: Internet Explorer 5.0 or above
I/O Interface:
5 4 3 2 1
No. Item
1Antenna connector
2 Status LED
3Reset button
4
5
Description
For attaching the external antenna. Indicates the WPG’s status.
A quick press on the the Reset button will reset the WPG without changing any user’s settings. Press and hold Reset button for more than 4 seconds to reset the WPG to its factory default settings.
For outputting audio signals received wirelessly from the PC.
For connecting the WPG to the Internet via a LAN.
English ... 32
