17
3. Firmly connect the EasyLink Combo Driv e (connector to connector) to the
computer.
To disconnect the EasyLink Combo Dr ive:
1. Click on the HotIDE icon ( ) on t he Window s ta skbar.
2. Select the stop operation.
A message appears to confirm the stop operation.
3. Click on OK.
4. Disconnect the EasyLink Combo Drive.
5. Tuck in the EasyLink Combo Drive cable connector into its storage slot.
Note: If the computer is on, and you disconnect the EasyLink Combo Drive
without using the HotIDE stop function, the computer w il l hang (stop
operating normally). Connect the EasyLink Co mbo Drive again to solve this
problem. It is advisable to follow the connect/di s connect procedures
discussed above. If the computer is off, you can disconnect the EasyLink
Combo Drive at your convenience.
Ejecting media

Ejecting a floppy disk

Press the floppy disk eject button to eject a floppy disk from the floppy drive.