Acer X5812 USB eModule Error Messages, SMBIOS eModule Error Messages, CPU eModule Error Messages

USB eModule Error Messages

Message Displayed	Description
Warning!	This message is displayed when a non-bootable USB device is enumerated and
Unsupported USB	disabled by the BIOS.
device found and
disabled!
Warning! Port 60h/	This message is displayed to indicate that port 60h/64h emulation mode cannot be
64h emulation is not	enabled for this USB host controller. This condition occurs if USB KBC emulation
supported by this	option is set for non-SMI mode.
USB Host Controller!
Warning! EHCI	This message is displayed to indicate that EHCI controller is disabled because of
controller disabled. It	incorrect data structure. This condition occur if the USB host controller needs 64-bit
requires 64bit data	data structure while the USB is ported with 32-bit data structure.
support in the BIOS.

SMBIOS eModule Error Messages

Message Displayed	Description
Not enough space in	This message is displayed when the size of the SMBIOS data exceeds the
Runtime area!!.	available SMBIOS runtime storage size.
SMBIOS data will not
be available.

CPU eModule Error Messages

Message Displayed	Description
Warning! This system	This message is displayed when the power requirements of the board do not match
board does not	the power requirement of the CPU.
support the power
requirements of the
installed processor.
The processor will be
run at a reduced
frequency, which will
impact system
performance.

MPS Table (Multi-processor) eModule Error Messages

Message Displayed	Description
Insufficient Runtime	This message is displayed when there is not enough space in the 0F000h runtime
space for MPS data!	area for creating MPS table.
System may operate
in PIC or Non-MPS
mode.

Chapter 4 63