Fluke RPM4 manual Error Messagess, Command, Ver, Zoffset, Reply Description

RPM4™ OPERATION AND MAINTENANCE MANUAL

COMMAND
‘n’ indicates an	DESCRIPTION
optional suffix
ULn	Read or set the upper limit for the current range.
UNITn	Read or set the pressure unit of measure for the current range.
VER	Read the RPM4 software version.
ZOFFSETn	Read or set the AutoZero Zoffset for the specified Q-RPT.
ZOFFSET:XX	Read or set the AutoZ Zoffset for the specified Q-RPT (old command).

4.4.2	ERROR MESSAGESS
			Table 17. Error #s and Descriptions
		REPLY	DESCRIPTION
		ERR# 0	“OK”
		ERR# 2	“Text argument is too long”
		ERR# 3	“Arguments cannot be 0”
		ERR# 4	“External device not detected”
		ERR# 5	Not used
		ERR# 6	“Numeric argument missing or out of range”
		ERR# 7	“Missing or improper command argument(s)”
		ERR# 8	“External device time-out error”
		ERR# 9	“Unknown command”
		ERR# 10	“Missing or invalid command suffix”
		ERR# 11	“Command missing argument”
		ERR# 12	“System overpressured” or “overpressure may result”
		ERR# 13	“Text queue overflow”
		ERR# 14	“User unit not defined”
		ERR# 17	Not used
		ERR# 18	“Command not yet available”
		ERR# 19	“Not available with absolute units”
		ERR# 20	“Not available with gauge device”
		ERR# 21	Not used
		ERR# 22	“Pressure is not stable”
		ERR# 23	“Option not available or installed”
		ERR# 25	Not used
		ERR# 26	“COM port failed to initialize”
		ERR# 27	“Internal device failure”
		ERR# 28	“Device failure”
		ERR# 29	“Device not available”
		ERR# 30	“Must be on range HI”
		ERR# 31	“Exceeds upper or lower limit”
		ERR# 32	“Not stable enough”
		ERR# 37	“Data table is full”
		ERR# 38	“Selected range is not available”
		ERR# 39	“Data verify error”
		ERR# 45	“Argument not allowed”
		ERR #46	“Argument cannot be negative”
		ERR #52	“Command obsolete”
		ERR# 53	“Not Available”

© 2004-2007 DH Instruments, a Fluke Company Page 86