Fluke RPM4 manual SI Version, Rpt, Designation, US Version, 000 500 300 200 100

1. INTRODUCTION

Q-RPTs of A10M and lower are available with two different performance levels, STANDARD class and PREMIUM class. See the product label on the RPM4 rear panel, the Q-RPT module label on the rear panel and/or the product calibration reports to determine the class of the Q-RPT(s) installed in RPM4.

Table 1. Reference Pressure Transducer (Q-RPT) Module Designations and Ranges

		SI VERSION
Q-RPT		MAXIMUM		MAXIMUM
DESIGNATION		RANGE		RANGE
		[kPa]		[kPa]
		Absolute		Gauge
A280M-L1	280 000		280 000
A200M-L1	200 000		200 000
A140M-L1	140 000		140 000
A100M-L1	100 000		100 000
A70M1	70 000		70 000
A40M1	40 000		40 000
A20M1	20 000		20 000
A14M1	14 000		14 000
A10M1	10 000		10 000
A7M1	7 000		7 000
A3.5M1	3 500		3 500
A2M1	2 000		2 000
A1.4M1	1 400		1 400
A700K1	700		700
A350K1	350		250
A200K1	200		100
A160K1	160		60
A100K1	110		10
BA100K4	110		--
G200K2	--		200
G100K2	--		100
G15K2	--		15
BG15K3	--		±15

US VERSION

MAXIMUM	MAXIMUM
RANGE	RANGE
[psi]	[psi]
Absolute	Gauge
40 000	40 000
30 000	30 000
20 000	20 000
15 000	15 000
10 000	10 000
6 000	6 000
3 000	3 000
2 000	2 000
1 500	1 500
1 000	1 000
500	500
300	300
200	200
100	100
50	35
30	15
23	8
16	1.5

16--

--30

--15

--2.2

--± 2.2

1.All AXXXX RPTs support absolute, gauge and compound (negative) gauge modes.

2.All GXXXX RPTs are positive gauge mode only.

3.BG15K is bi-directional gauge from - 15 to + 15 kPa (- 2.2 to + 2.2 psi).

4.BA100K is a barometric range whose low point is 70 kPa absolute (10 psi).

Page 3 © 2004-2007 DH Instruments, a Fluke Company