Fluke RPM4 manual SDSAUTOn

				4. REMOTE OPERATION
SDSACT
Purpose	Read or set the status for both the Hi and Lo Q-RPT’s SDS systems. This is equivalent to
	use of the [SDS] key from the RPM4 front panel.
Command	“SDS state”
Query	“SDS”
Classic	“SDS=state”
	“SDS”
Default	“SDS=1”
Arguments	”state”:		‘0’ OPEN the SDS system on the active Q-RPT and CLOSE the SDS
			system on the “inactive” Q-RPT.
			‘1’ to CLOSE the SDS system on both Q-RPTs.
Remarks	This command can be used to select one Q-RPT at a time, ensuring that the “inactive” Q-RPT
	SDS is closed. If a Q-RPT’s SDS is full time “OFF”, then it is not be affected by this
	command. The status of the active Q-RPT’s SDS system is replied. If the RPM4 is in
	differential mode or the HL Q-RPT is active, then this command opens or close both the Hi
	and Lo SDS at the same time, unless the SDS is full time “off”.
Example	Cmd sent:		“SDS? 1”
(enhanced)	Query reply:		“1”
Example	Cmd sent:		“SDS=0”
(classic)	Query reply:		“SDS=0”
Errors	ERR# 7:		Argument not a ‘0’ or a ‘1’
	ERR# 10:		Invalid suffix or command argument.
	ERR# 23:		SDS not installed on this Q-RPT
See Also	“SDSAUTO”, “SDS”
	3.2.7, 3.3.8, 3.5.4
SDSAUTOn
Purpose	Read or set the automatic full time ON/OFF status for the specified or active Q-RPT SDS
	systems. This is equivalent to use of the SDS full time ON/OFF function from the RPM4
	front panel.
Command	“SDSAUTOn on”
Query	“SDSAUTOn”
Classic	“SDSAUTOn=on”
	“SDSAUTOn”
Default	“SDSAUTOn=1”
Optional Suffix	“n”	The active Q-RPT is assumed if no suffix is given. If the “HL” Q-RPT is the active Q-
		RPT, and no suffix is specified, then the “Hi” Q-RPT is assumed
		‘1’	Specify the Hi Q-RPT SDS
		‘2’	Specify the Lo Q-RPT SDS
Arguments	” on”:		‘0’ to turn the SDS system OFF.
			‘1’ to turn the SDS system ON
Remarks	Turning an SDS system to full time “OFF” or “ON” affects how the remote command
	“SDSACT” and the front panel SDS button can affect each Q-RPT’s SDS system.
Example	Cmd sent:		“SDSAUTO2? 1”
(enhanced)	Query reply:		“1”
Example	Cmd sent:		“SDSAUTO1=0”
(classic)	Query reply:		“SDSAUTO1=0”
Errors	ERR# 7:		Argument not a ‘0’ or a ‘1’
	ERR# 10:		Invalid suffix.
	ERR# 23:		SDS not installed on this Q-RPT
See Also	“SDSACT”, “SDS”
	3.2.7, 3.3.8, 3.5.4,
SCRSAV
Purpose	Read or set the front panel display screen saver activation time.
Command	“SCRSAV n”
Query	“SCRSAV?”
Classic	“SCRSAV=n”
	“SCRSAV”
Arguments	n:		The inactivity period (0 – 99 minutes) after which screen saver activates.
Default	“SCRSAV 10”
Remarks	The RPM4 front panel will dim after a period of keyboard and remote inactivity. Setting this
	value to ‘0’ disables this feature.
Example	Cmd sent:		“SCRSAV 30”
(enhanced)	Query reply:		“30”	(No reply if GPIB-488)
Example	Cmd sent:		“SCRSAV? 30”
(enhanced)	Query reply:		“30”
Example	Sent:		“SCRSAV=30”
(classic)	Reply:		“30”
Errors	ERR# 6		The argument was invalid.
See Also	3.5.5.1

Page 103 © 2004-2007 DH Instruments, a Fluke Company