Acnodes FPC 8084 A.2.6 PNP/PCI Configuration, PNP OS Installed, Reset Configuration Data

FPC 8084 User’s Manual

A.2.6 PNP/PCI Configuration

This section describes the PCI bus system configuration. PCI or Personal Computer Interconnect is a system which allows I/O devices to operate at speeds nearing the speed of the CPU when communicating with its own special components. This section covers some very technical items, and it is strongly recommended that only experienced users should make changes to the default settings.

Phoe nix – Award BIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed		No		Item Help
Reset Configuration Data		Disabled		Menu Level f
Resources Controlled By		Manual
X IRQ Resources		Press Enter		Select Yes if you are
X DMA Resources		Press Enter		using a Plug and play
				capable operating
PCI/VGA Palette Snoop		Disabled		system select No if
Assign IRQ For VGA		Enabled		you need the BIOS to
Assign IRQ For USB		Enabled		configure non-boot
				devices
ÇÈ ÆÅ : M ov e	Ente r: Select	+/-/P U/PD : Va lue	F10: Save ES C: Exit F 1:
		Gene ral Help

F5: Previ ous V alue s F 6: F ail -Safe Defa ults F7 : Opti mized Defa ults

PNP OS Installed

This item is to determine install PnP OS or not. The options available are Yes and No.

Reset Configuration Data

Normally, this field is ￿Disabled￿. Select ￿Enabled￿ to reset Extended System Configuration Data (ESCD). W hen exiting Setup or installed a new add-on, the system reconfiguration has caused such a serious conflict that the operating system cannot boot. The options available are Enabled and Disabled.

56