Settings
Changing radio's settings
To change the radio settings:
1.Press to display the Source menu.
2.Press or to highlight Settings and then press SELECT.
3.Press or to highlight a setting and press SELECT to enter the
Network Setup
Software Update
Weather
Advanced Setting
•Repeat this step to browse for more settings and
Network setup
To change the network setting of the radio: Scan for network, Enter network name, Use WPS, View Config, Edit Config, Signal Warning and Scan for Networks.
•If Use WPS is selected, you can select from PBC Mode or PIN Mode. Then press SELECT to start. You can also press the WPS button at the back of the radio to activate the WPS PBC mode.
PBC mode
PIN mode
•If PBC Mode is selected, remember to press the WPS button on your router. The open WPS device of those found will be displayed after searching. Some routers may timeout the connection in one minute, you may repeat the process again if the connection fail.
•If PIN Mode is selected, the following screen will be displayed. Enter the PIN shown into your WPS router's settings.
WPS
PIN: 11318880
SELECT to start
To check IP address:
•Press to display the Source menu.
•Press or to highlight Settings and then press SELECT.
•Press or to highlight Network Setup and then press SELECT.
•Press or to highlight View Config and then press SELECT.
•Press or to select IP Address.
Software updates
To check if newer firmware is available. Follow the instructions on the display for update.
Account info
•To change the login information (username and password) sent by the radio when attempting to login to the MP3tunes services.
•To edit the locale for time and weather functions. The locale is used for clock time setting, weather forecast and searching local Internet radio stations in your area.
If you have changed your account information through MP3tunes' website, please also edit the account information in this setting. The
information here must match your account information online.
Device info
To show the model number, firmware version, MAC address, PIN number of the radio, press or . MAC address and PIN are necessary to activate your AR Infinite Radio accounts.
Display
To change brightness and contrast of the display.
•If the unit is successfully paired up with open WPS router, the radio should then be connected to the Internet.
21