FUNAI LC195EM9 B, LC195EM9 2 owner manual Optional Setting, 5Channel List, 5Manual Register, Enter

OPTIONAL SETTING

5Channel List

The channel list function lets you remove undesired channels from the channel registration list.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

5Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

INTRODUCTION PREPARATION INITIAL

or or

3 Use [Cursor K/L] to select “Channel List”, then press	3 Use [Cursor K/L] to select “Manual Register”, then
[ENTER].	press [ENTER].

or	Channell	or	Channell
	Autoscan		Autoscan
	Channel List		Channel List
	Manual Register		Manual Register

Antenna Antenna

SETTING WATCHING TV OPTIONAL SETTING

4 Use [Cursor K/L] to select the channel you want to	4 Use [the Number buttons] to enter the number of the
remove, then press [ENTER].	channel you want to add, then press [ENTER].

	Channell Listi
or	Highlight channels for Ch			DTV	6		11
	Up/Down key selection.
					27
				DTV	8	Manuall Registeri
					9
				DTV	48	For analog channels, select a	Register
					58	channel to register using number
						keys.
				DTV	67
						For digital channels, you must
				BACK		perform Autoscan function.
	Ch Select		Watch/Skip
		ENTER		Back

• The channel display for the removed channel
		Ch Change	Back
darkens. You will not be able to select the channel			BACK
again using [CH. K/L].
• To reactivate a removed channel, use [Cursor K/L] and
	5 Press [SETUP] to exit.
press [ENTER]. The registered channels are highlighted.

• When you remove a major channel, its minor channels are removed as well.

TROUBLESHOOTING INFORMATION

5Press [SETUP] to exit.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

Note:

•If set up completes successfully, “Registered to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH. K / L], you can select the memorized channels only.

19

EN