FUNAI LC195EM9 2, LC195EM9 B 5Still Mode, 5Switching Each Input Mode, 5Switching Audio Mode

5Still Mode

You can pause the image shown on the TV screen.

Press [STILL] to pause the image shown on the TV screen.

Still

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

5Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH. K] repeatedly to cycle through the input modes.

DTV/TV channel

or Video1

Video2

or

PC

•Pressing [CH. L] reverses the direction of the input modes.

•To use the video or S-video input jack on the unit, select “Video1”.

•To use the component video input jacks on the unit, select “Video2”.

•To use the PC input jack on the unit, select “PC”.

5Switching Audio Mode					INTRODUCTION
This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.
TV
					PREPARATION
press repeatedly to cycle through the available audio
1 Press [AUDIO	] to display the currently selected
audio mode. While receiving an MTS broadcast,
channel.
			6
					INITIAL
			SAP / STEREO
When all audio are available					SETTING
SAP / STEREO				SAP / MONO
		SAP / STEREO
When stereo and monaural audio are available
					WATCHINGTV
SAP / MONO				SAP / MONO
MONO / STEREO				MONO / STEREO
When SAP and monaural audio are available
When only monaural audio is available
		MONO
					OPTIONAL
	(Cannot be switched)
STEREO	: Outputs stereo-audio				SETTING
MONO	: Outputs mono-audio
SAP	: Outputs second audio program
DTV
					TROUBLESHOOTING
1 Press [AUDIO	] to display the currently selected
language and the number of available languages.
			6-1
				English 1/3
2 Press [AUDIO	] repeatedly to cycle through the				INFORMATION
available audio languages.
• Available languages differ depending on the
broadcast. “Other” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.

Note:

• Pressing [AUDIO ] does not control external audio devices.

•The information display will automatically disappear in a few seconds.

15

EN