5Closed Caption

You can view closed captioning (cc) for TV programs, movies and news. Closed caption refer to text of dialogue or descriptions displayed on-screen for the hearing impaired.

1Press [SETUP] to display the main menu.

Caption Mode

CC1 and Text1;

are the primary caption and text services.

The captioning or text is displayed in the same language as the program’s dialogue

(up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).

INTRODUCTION PREPARATION

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

or

3Use [Cursor K/L] to select “Closed Caption”, then press [ENTER].

or

Detailil

Closed Caption

 

V–chip

 

PC Settings

4Use [Cursor K/L] to select “Conventional CC”, then press [ENTER].

or

Closedl

Captioni

 

Conventional CC

Off

 

DTV CC

Off

 

CC Style

 

5Use [Cursor K/L] to select the desired closed caption, then press [ENTER].

or

Closedl

Captioni

 

Conventional CC

Off

 

DTV CC

CC1

 

CC Style

CC2

 

 

 

CC3

 

 

 

CC4

 

 

 

Text1

 

 

 

Text2

 

 

 

Text3

 

 

 

Text4

CC3 and Text3;

serve as the preferred data channels.

The captioning or text is often a secondary language.

CC2, CC4, Text2 and Text4;

are rarely available and broadcasters use them only in special conditions, such as when “CC1” and “CC3” or “Text1” and “Text3” are not available.

There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen immediately.

Pop-on mode:

Once characters are stored in memory, they are displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling (max. 4 lines).

6Press [SETUP] to exit.

Note:

To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.

Not all TV programs and commercials have the closed caption or all types of the closed caption.

Captions and texts may not match the TV voice exactly.

Changing channels may delay the closed caption for a few seconds.

Adjusting or muting the volume may delay the closed caption for a few seconds.

Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace with the on-screen action. This is not a problem with the unit.

The caption or text characters will not be displayed while the main menu or functions display is shown.

If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.

If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are:

-Automobile ignition noise

-Electric motor noise

-Weak signal reception

-Multiplex signal reception (ghosts or screen flutter)

The unit retains the closed caption setting if the power fails.

When the unit receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the unit may not display the correct caption or text.

INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

23

EN

Page 23
Image 23
FUNAI LC195EM9 2, LC195EM9 B 5Closed Caption, Caption Mode, CC1 and Text1, CC3 and Text3, CC2, CC4, Text2 and Text4