FUNAI LC195EM9 2, LC195EM9 B 5PC Settings, Horizontal Position, Vertical Position, Clock, Phase

OPTIONAL SETTING

5PC Settings

This function lets you adjust the PC screen position, clock and phase during

PC input.

1 Press [SETUP] to display the main menu. 5 Adjust the setting.

Auto Adjustment

Use [Cursor K/L] to select “Adjust”, then press [ENTER].

2Use [Cursor K/L] to select “DETAIL”, then press [ENTER].

or

	Auto Adjustmentj
or	This function automatically	Cancel
	adjusts the position, clock and	Adjust
	phase of the picture element.

•The horizontal / vertical position, clock and phase of the PC screen are automatically adjusted.

3Use [Cursor K/L] to select “PC settings”, then press [ENTER].

or	Detailil
	Closed Caption
	V–chip
	PC Settings

4Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].

or	PC Settingsi
	Auto Adjustment
	Horizontal Position	0
	Vertical Position	0
	Clock	0
	Phase	0

Horizontal Position, Vertical Position

Use [Cursor s/B] to adjust.

			Cursor s	Cursor B
Horizontal Position			to move PC	to move PC
H. Position	0	-
			+	screen right
Adjust		Move	screen left
			ENTER Enter
Vertical Position			to move PC	to move PC
V. Position	0	-
			+	screen up
Adjust		Move	screen down
			ENTER Enter

Clock, Phase

Use [Cursor {/B] to adjust the “Clock” setting to stabilize the PC screen and the “Phase” setting to improve the clarity of the PC screen.

			Cursor s	Cursor B
Clock
Clock	0
Adjust	Move	ENTER Enter	to decrease	to increase
Phase			setting value	setting value
Phase	0
Adjust	Move	ENTER Enter

6Press [SETUP] to exit.

Note:

• Adjust the “Phase” setting after the “Clock” setting has been properly adjusted.

• You may not obtain an appropriate screen with auto adjustment for some signals. In this case, adjust the settings manually.

• The limit value of the horizontal / vertical position differs depending on PC input signal.

30

EN