5Troubleshooting Guide, Symptom Remedy | FUNAI LC195EM9 B instruction

TROUBLESHOOTING

5Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following chart

and all connections once before calling for service.

		Symptom	Remedy
			• Be sure the power cord is plugged in.
		No power	• If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to
			reset itself.
			• Check if the power is on.
			• Check if the power is on.
		No picture or sound	• Check if the right input mode is selected.
		No picture or sound	• View other TV channels. The problem might be limited to the broadcasting station.

			• Turn off the power and wait for about 1 minute, then turn on the unit again.
		No color	• View other TV channels. The problem might be limited to the broadcasting station.

			• Adjust “Color” in the picture menu.
	T		• Adjust “Color” in the picture menu.
			• Electrical interference from nearby appliances may affect picture quality.


	V	Sound OK, picture poor	• Adjust “Contrast” and “Brightness” in the picture menu.
			• View other TV channels. The problem might be limited to the broadcasting station.
		Ghosts, lines or streaks in	• Electrical interference from nearby appliances may affect picture quality.
		picture	• View other TV channels. The problem might be limited to the broadcasting station.
		Different color marks on TV	• Move your TV away from nearby electric appliances. Turn off the power and wait

			30 minutes before turning it back on.
		screen	30 minutes before turning it back on.
		screen	• View other TV channels. The problem might be limited to the broadcasting station.

		Picture OK, sound poor	• View other TV channels. The problem might be limited to the broadcasting station.

			• Check if the audio cable is plugged in correctly .
			• Check if the audio cable is plugged in correctly .

		Captions are displayed as a	• Interference from buildings or weather conditions may cause captioning to be
		white box.	incomplete.
	C	No caption is displayed in the	• Broadcasting station may shorten the program to insert advertisement.
	A	Closed Caption-supported	The closed caption decoder cannot read the information of the shortened
	P	program.	program.
	T	No caption is displayed when	• The disc or cassette tape may be illegally copied, or the caption signal might not
	I	playing the discs or cassette tape
	O	containing captions.	have been read during copying.
	O	containing captions.
	N	Black box is displayed in the TV	• The text mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.
	N

		screen.
		screen.

Note:

•The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

•Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for more details on correct operations.

INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

31

EN

Image 31

FUNAI LC195EM9 B, LC195EM9 2 5Troubleshooting Guide, All connections once before calling for service, Symptom Remedy

Contents

LC195EM9 B To Receive DIGITAL/ANALOG SIGNAL, YOU Must Connect Antenna RADIO-TV Interference PrecautionsIntroduction FCC Warning Avoid a place with drastic temperature changes Do not handle the power cord with wet handsLocation and Handling 5Trademark Information 5Supplied Accessories5Symbols Used in this Manual 5Attaching the Stand Contents FeaturesDTV/TV/CATV Mute 5Buttons on the Remote Control5Installing the Batteries Battery Precautions 5Rear Panel 5Control Panel Connection to Cable Box or Satellite Box Preparation5Basic Connection Antenna Connection Component Video Connection 5External Device ConnectionVideo Connection VCR Format PC Connection Before you begin Initial Setting5Initial Setup 5Main Menu Use Cursor K/L to select Autoscan, then press Enter Press Setup to exit5Auto Channel Scan 5Language Selection Watching TV 5Volume Adjustment5Sleep Timer To Cancel the Sleep Timer 5Switching Each Input Mode 5Still Mode5Switching Audio Mode Day of Memoriesi 5Screen InformationBroadcasting Information Press Info Digital mode 5TV Screen Display ModeFor 43 video signal For 169 video signal Full Dot By Dot Normal *A For PC input signalNormal * a Dot By Dot Enter Optional Setting5Channel List 5Manual Register Channell 5Antenna ConfirmationAntenna 5Picture Adjustment Treble, Bass 5Sound AdjustmentReset Settings You can adjust treble and bass CC3 and Text3 Caption Mode5Closed Caption CC1 and Text1 DTV CC 5DTV Closed CaptionUse Cursor K/L to select DTV CC, then press Enter Font Style 5CC StyleFont Size Back Opacity Font ColorEdge Type Back Color Chip Chipip Enter passwordChip ip Chipip To Set the Sub RatingsUse Cursor K/L to select Mpaa Rating, then press Enter Use Cursor K/L to select TV Rating, then press Enter Field Use Cursor K/L to select New Password, then press Horizontal Position, Vertical Position 5PC SettingsClock, Phase Auto Adjustment Symptom Remedy Troubleshooting5Troubleshooting Guide All connections once before calling for service Question Answer Information MaintenanceGlossary 5Cable Channel Designations 5General Specifications5Electrical Specification 5Other Specifications Memo Limited Warranty AYUDA? Advertencia DE LA FCC IntroducciónPrecauciones Para consultarlos, si los necesita, en el futuro Colocación Y Manejo Para Evitar Peligros DE Descarga Eléctrica O IncendioNota Acerca DEL Reciclado 5Información sobre Marcas Registradas 5Accesorios Suministrados5Conectar el Soporte 5Símbolos Utilizados en este Manual Contenido Características 5Instalación de las Pilas 5Botones en el Mando a DistanciaPrecauciones sobre las Pilas 5Panel de Control Conexión a Caja de Cable o Caja de Satélite Preparación5Conexión Básica Conexión de Antena Conexión de Vídeo en Componentes 5Conexión de Dispositivo ExternoConexión de S-video Conexión de Vídeo Pueden aparecer las siguientes señales Conexión de PCFormato Antes de empezar 5Configuración InicialAjuste Inicial 5Menú Principal 5Exploración Automática de Canales Presione Setup para salir5Selección de Idioma 5Selección de Canal 5Ajuste de VolumenPara Cancelar el Temporizador de Apagado Para VER LA Televisión Estéreo 5Modo Fijo5Para Cambiar Entre Cada Modo de Entrada Cómo cambiar el idioma de audio en el modo digital Un díaía de recuerdos 5Información de PantallaInformación de Emisión Presione Info Modo de entrada analógica/externa 5Modo de Visualización de Pantalla del TelevisorPara señal de vídeo Modo digital Formato Resolución Para señal de entrada PCTotal Punto Por Punto Normal *A Total 5Lista de Canales Ajuste Opcional5Registro Manual 5Confirmación de la Antena Canal Presione Setup para visualizar el menú principalAntena 5Ajuste de Imagen Haga el ajuste del sonido 5Ajuste de SonidoAgudo, Grave Puede ajustar el treble y el bajo 3 y Texto3 Subtítulos1 y Texto1 Modo de Subtítulos Subtítuloí lo Cerrado 5Subtítulos en DTV Estilo Fuente 5Estilo CC Opaco Atrás Color FuenteTipo Borde Color Fondo Dpágina Clase de TV Para Ajustar las Subcategorías Clase de Mpaa Nuevo Código de Acceso Ajuste Automático 5Ajustes de PCPosición Horizontal, Posición Vertical Reloj, Fase Síntoma Solución Solución DE Problemas5Guía de Solución de Problemas Siguiente tabla antes de llamar al servicio técnico Pregunta Respuesta 5Preguntas FrecuentesInput Select o utilizando CH. K / L Glosario InformaciónMantenimiento 5Otras Especificaciones 5Denominaciones de Canales de Cable5Especificaciones Generales 5Especificación Eléctrica Memo Garantía Limitada