Acoustic Research ARIRC200 Further help on Wi-FiEnabler for, ARIRC205, More information

More information

Poor FM/AM Tuner reception.

•Check the antenna connection.

•Move antenna.

•Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner and microwave.

Cannot record radio.

•Record feature is only available for Internet Radio, AM and FM Tuner.

•The internal memory of the radio may be full. Remove some of the old recordings.

Cannot play back music files on connected USB device.

•Make sure USB device is securely connected.

•Digital Right Management (DRM) type music files will not be played.

•The radio supports FAT12, 16 and 32 file systems only. Other file systems from Linux, MAC or NTFS are not supported.

The LED of ON/STANDBY button is flashing.

•The LED is flashing (5-second interval) when the unit is being powered by the backup batteries due to electricity supply interruption. Please check your AC power supply.

•If the LED is flashing even faster (3-second interval), this means that the unit is being powered by weak backup batteries. Please replace the backup batteries (refer to page 9). We recommend that you replace the batteries every year (or more often in case of multiple power outages) to avoid low battery power. Otherwise, clock and alarm accuracy may be affected when electricity supply is interrupted.

Cannot stop the demonstration mode.

•To exit the demonstration, press and release in sequence the buttons on top of the radio: preset 1, then SLEEP/SNOOZE, then preset 6.

My question was not answered here.

•Visit www.arinfiniteradio.com for an up-to- date list of frequently asked questions.

Further help on Wi-Fi Enabler (for	EN
ARIRC205)

•The AR Wi-Fi Enabler adds Wi-Fi capability to your existing network. Page 9, step 4 shows you how to connect the AR Wi-Fi Enabler to your network.

•Your Wi-Fi Enabler comes preconfigured from the factory so normally no changes should be necessary. This information is provided for the more advanced users or for troubleshooting purposes.

•If you encounter problems connecting the radio to the Internet via AR Wi-Fi Enabler, the settings on the radio may not match the settings on the Enabler. Follow the steps below to configure the settings again.

To find the configuration information of the Wi-Fi Enabler:

•Find the Wi-Fi Enabler’s factory configuration information on the white label on the back of the AR Infinite Radio. This label includes: 1) the Wireless Network’s name (SSID), 2) the Security Type, and 3) the password/key.

To check if the configuration information is the same in the radio:

1.Press to display the Source menu of the radio. Press to highlight Settings and then press SELECT.

2.In the Settings menu, press to highlight Network Setup and then press SELECT.

3.In the Network Setup screen, press to highlight Wireless and then press SELECT.

4.At the warning screen, press SELECT while Continue is highlighted in the screen below.

29