Chapter 4 Using Advanced Setup

Note: Contact the ISP if unsure of the proper configuration.

Specify a Static IP Address

Select this option if the ISP service is configured to use RFC 1483 Bridged or Routed using a Static IP Address. Enter the IP Address, Subnet Mask, and Default Gateway Address provided by the ISP in the “Broadband Connection via Static IP Address” screen, which causes the IP address and routing information to termi- nate at the Modem, as opposed to the IP address and routing information being bridged to terminate at the computer. This allows the use of the router capabilities for the Local Area Network (LAN).

Note: Contact the ISP if unsure of the proper configuration.

39

Page 42
Image 42
Actiontec electronic GT701A user manual Specify a Static IP Address