Actiontec electronic GT701A user manual Setting Up Modem, Connecting a Computer to the Modem

Models: GT701A

1 119
Download 119 pages 47.45 Kb
Page 10
Image 10

Setting Up

2

the Modem

The instructions that follow parallel the steps contained in the Actiontec Installation Buddy, which provides a visual guide to setting up the Modem. It is recommended the user run the Installation Buddy first, before attempting any other procedures.

To set up the Modem, it must be connected to a computer, and then configured. After connecting this first computer, other computers can be added to the network via USB or Ethernet (see “Setting Up a Network” on page 63).

Connecting a Computer to the Modem

Connecting a computer to the Modem for setup involves three basic steps: initial setup, plugging in the Modem’s power cord, and connecting the Modem to the computer.

Connecting Via Ethernet

1.Insert the Installation CD in the CD-ROMdrive of the computer. The Installation Buddy starts automatically. Wait until the following screen appears, read the on-screen instructions, then click Next.

7

Page 10
Image 10
Actiontec electronic GT701A user manual Setting Up Modem, Connecting a Computer to the Modem