The Wireless Connectivity Expert

1. OVERVIEW

Serial-IR Dongle Installation Manual

This document provides instructions to install the ACT IR220L+/220L/200L Serial-IR dongle along with Windows 98/ME/2000/XP device driver. It is assumed that the user is familiar with basic operation of Windows.

2. PACKING LIST

When you unpack the package, the following items should be found:

A.ACT-IR220Lplus or ACT-IR220L or ACT-IR200L.

B.User’s Guide CD

3. SYSTEM REQUIREMENTS

To use ACT-IR220L+/220L/220L, your computer MUST meet the following requirements:

A.Windows 98/ME/2000/XP.

B.One unoccupied Serial (RS232) COM port.

C.One unoccupied virtual COM port (Com 4)

4. BIOS SETUP VERIFICATION

Before installing the device driver, you MUST setup or verify your BIOS FIRST. Below demonstrates an example of ACT-IR220L+ being installed on Com2:

A.Choose PNP & PCI from BIOS SETUP:

PNP OS Installed:

NO

Resource Controlled by:

Manual

B. Choose Integrated Peripherals from BIOS SETUP:

Onboard UART2 Serial Port

2F8H/IRQ3

2 :

 

Onboard IR function:

Disable or

UART2:

Normal

♥ Copyright 2001-2008 ACTiSYS Corp. Page 5 of 37

Jul. 8, 2008

ACTiSYS Confidential Information

Version 1.5.1.1